null
Created with Sketch. Created with Sketch.
Toggle menu

Pipe Plugs

  • 6" DRAINBLOCK Kit

    6" DRAINBLOCK Kit

    Remotely seals off abandoned drains and sewer laterals permanently.  A semi-porous bag that contains a sealed sachet of PU resin foam is remotely positioned inside the sewer lateral using a duct rodder or fiberglass fish tape. The cylindrical...

    $263.54
    Add to Cart
  • 4" DRAINBLOCK Kit

    4" DRAINBLOCK Kit

    Remotely seals off abandoned drains and sewer laterals permanently.  A semi-porous bag that contains a sealed sachet of PU resin foam is remotely positioned inside the sewer lateral using a duct rodder or fiberglass fish tape. The cylindrical...

    $226.97
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. 36" Expansion Plug Wrench

    36" Expansion Plug Wrench

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $102.00
    Add to Cart
  • 18" Disc Stopper Wrench - (left hand thread)
The Disc Stoppers are pushed into the pipe with a T-Handle wrench. Internal cleaning or deburring is not necessary. The Disc Stopper washers are designed to create a flexible sealing wedge inside the pipe. After pushing the Disc Stopper into place, the Stopper is detached by unscrewing it from the wrench. Allowing the end of the pipe to be repaired. Once work is complete the Disc Stopper can be retrieved using the wrench. 18” Disc Stopper Wrench (left hand thread)

    18” Disc Stopper Wrench (left hand thread)

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $63.63
    Add to Cart
  • 24" Expansion Plug Wrench

    24" Expansion Plug Wrench

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $60.00
    Add to Cart
  • 18" Expansion Plug Wrench

    18" Expansion Plug Wrench

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $60.00
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. 12" Expansion Plug Wrench

    12" Expansion Plug Wrench

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $54.60
    Add to Cart
  • Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem end to attach a special T-Handle wrench to place the stopper at the desired location within the pipe. Four heavy rubber washers backed by steel plates, separated by spacing tubes provide the seal. 4” Disc Stopper

    4” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $43.25
    Add to Cart
  • Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem end to attach a special T-Handle wrench to place the stopper at the desired location within the pipe. Four heavy rubber washers backed by steel plates, separated by spacing tubes provide the seal. 3” Disc Stopper

    3” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $37.62
    Add to Cart
  • Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem end to attach a special T-Handle wrench to place the stopper at the desired location within the pipe. Four heavy rubber washers backed by steel plates, separated by spacing tubes provide the seal. 2” Disc Stopper

    2” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $31.71
    Add to Cart
  • Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem end to attach a special T-Handle wrench to place the stopper at the desired location within the pipe. Four heavy rubber washers backed by steel plates, separated by spacing tubes provide the seal. 1 1/2” Disc Stopper

    1 1/2” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $19.02
    Add to Cart
  • Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem end to attach a special T-Handle wrench to place the stopper at the desired location within the pipe. Four heavy rubber washers backed by steel plates, separated by spacing tubes provide the seal. 1 1/4” Disc Stopper

    1 1/4” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $15.42
    Add to Cart
  • 1” Disc Stopper

    1” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $14.02
    Add to Cart
  • 3/4” Disc Stopper

    3/4” Disc Stopper

    Disc Stoppers are a fast, easy and economical method to stop the flow of gas when repairing service lines up to 4" in diameter. They can also be used to plug the ends of abandoned lines. Constructed of a steel shaft with reverse male threads on the stem...

    $13.24
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. 2" Rubber Detachable Expansion Plugs

    2" Rubber Detachable Expansion Plugs

    Specially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $7.56
    Add to Cart
  • 1-1/2" Rubber Detachable Expansion Plugs

    1-1/2" Rubber Detachable Expansion Plugs

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $6.12
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. 1-1/4" Rubber Detachable Expansion Plugs

    1-1/4" Rubber Detachable Expansion Plugs

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $5.88
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. 1" Rubber Detachable Expansion Plugs

    1" Rubber Detachable Expansion Plugs

    Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also...

    $5.64
    Add to Cart
  • Speecially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.  Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench.

    3/4" Detachable Rubber Expansion Plugs

    Specially designed to temporarily seal and stop off pipe ends remotely during fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in a variety of sizes, ranging from 1/2"...

    $5.52
    Add to Cart
  • Specially designed to temporarily seal and stop off pipe ends remotely during fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in a variety of sizes, ranging from 1/2" through 2” Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects. These pipe plugs are composed of two steel "discs," which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. As the discs are compressed together, the rubber expands, ensuring a tight fit inside the diameter of the pipe. These detachable plugs offer a gas tight seal making it easy to change out a valve or fitting.

    1/2" Detachable Rubber Expansion Plug

    Specially designed to temporarily seal and stop off pipe ends remotely during fitting renewal or service line maintenance. Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in a variety of sizes, ranging from 1/2"...

    $5.16
    Add to Cart