8" IPS Mudtight PE Pipe Puller

8" IPS SDR 11-17.5 Pipe & Duct Puller (no rear eye)

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

6" IPS PSI Pipe Puller SDR 11

6" IPS Mudtight PE Pipe Puller

6" IPS SDR 11-21 Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

4" IPS PSI Pipe Puller SDR 11

4" IPS Mudtight PE Pipe Puller

3" IPS PSI Pipe Puller SDR 11

4" IPS SDR 11-21 Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

3" IPS Mudtight PE Pipe Puller

¾" IPS PSI Pipe Puller SDR 11

6''-6 3/4'' Wire Mesh Pipe Puller

Cut Sheet (PDF) Also known as Towing Socks, Chinese Fingers or Pulling Grips used to pull pipe above or below ground. The harder the pull, the tighter the grip. Commonly used to install pipe or conduit using directional drilling rig (HDD) or vibratory...

2" IPS PSI Pipe Puller SDR 11

2" IPS Mudtight PE Pipe Puller

3" IPS SDR 11-21 Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

2" CTS SDR 9 Pipe and Duct Puller

Fits 2in SDR 9 pipe sizes (1.62in ID). Best all-around puller for open trench work or conduit. Inserts directly into open PE pipe end without special preparation. Twist the eye and the grippers lock into position without the use of wrenches. Gripping...

1 IPS PSI Pipe Puller SDR 11

Lead Time: 4 Weeks

1 1/2" IPS Mudtight PE Pipe Puller

1 1/4 CTS Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

2" IPS SDR 11-21 Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

1 1/4'' IPS PSI Pipe Puller SDR 11

1 ¼" CTS PSI Pipe Puller SDR 11

1" CTS Pipe PSI Puller SDR 11

1 1/2'' IPS Pipe and Duct Puller

1-1/2" IPS PE Pipe Puller. ID Grip Range 1.47"-1.811" An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs...

1 1/4 IPS Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

1" IPS Mudtight PE Pipe Puller

1 1/4" IPS Mudtight PE Pipe Puller

1" CTS Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

3/4 in CTS Pipe and Duct Puller

Use on 3/4'' CTS PE Pipe  Grip range .67”-.75” An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional...

3/4'' IPS (25mm) Pipe Puller

Use on 3/4" IPS PE Pipe SDR 11-17.6 Grip Range: 0.84'' - 0.95'' No rear eye An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and...

1" IPS Pipe and Duct Puller (32MM)

ID Grip Range 0.88"- 1.00" No rear eye An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most...

4 1/4" - 4 7/8" Wire Mesh Pipe Puller

1/2 CTS Pipe and Duct Puller

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

3 1/2" - 4 1/4" Wire Mesh Pipe Puller

2 3/4" - 3 1/2" Wire Mesh Pipe Puller

2"-2 3/4" Wire Mesh Pipe Puller

2'' Screw-In Fixed Head PE Pipe Puller

Grip Range 1.91″ - 2.08″ With Rear Lug Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

1 3/4" Screw-In Fixed Head PE Pipe Puller

Grip Range 1.65″ - 1.85″ With Rear Lug. Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

1 1/4"-2" Wire Mesh Pipe Puller

1 1/2" Screw-In Fixed Head PE Pipe Puller

Grip Range 1.48″ - 1.66″ With Rear Lug. Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

3/4" - 1 1/4" Wire Mesh Pipe Puller

1 1/4" Screw-In Fixed Head PE Pipe Puller

Grip Range 1.26″ - 1.44″ With Rear Lug. Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

1/2"- 3/4" Wire Mesh Pipe Puller

1" Screw-In Fixed Head PE Pipe Puller

Grip Range 0.94″ - 1.15″ With Rear Lug. Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

3/4" Screw-In Fixed Head PE Pipe Puller

Grip Range 0.72″ - 0.93″ With Rear Lug. Pull polyethylene water pipe, gas pipe and cable ducting with a vibratory plow. Install innerduct inside large cable duct. Install pipe and ducting in Horizontal and Directional Drilling applications. ...

8" IPS PSI Pipe Puller SDR 11

¾ CTS PSI Pipe Puller SDR 11

12 IPS SDR 11-17.5 Pipe and Duct Puller (special order)

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

10" IPS 11-17.5 Pipe and Duct Puller (special order)

An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors available in the...

5" IPS SDR 11-21 Pipe and Duct Puller (special order)

Lead Time: 4-6 Weeks An instant direct connection between PE pipe to pipe laying equipment. Use with open-trench main installations, service pipe renewals, underground trenchless methods, and directional drilling rigs. The most reliable connectors...